小安派烧录好示例一段时间会卡屏

> 本帖最后由 云梦 于 2024-6-25 15:40 编辑 烧录好之后连接wifi会卡屏，wifi信息烧录后一直存在，循环卡屏.串口信息反馈 ``` root@cloud:~/AiPi-Open-Kits/ai-pi_-hzy_-weather# picocom /dev/ttyUSB0 -b 2000000 picocom v3.1port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 2000000 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : noType [C-a] [C-h] to see available commands Terminal ready [F][MAIN] [MAIN:157]heap_size-------> 4277992 [F][MAIN] [MAIN:157]heap_size-------> 4277988 [F][MAIN] [MAIN:157]heap_size-------> 4277904 addr@0xa02363dc is xip flash, size 5 addr@0xa02363dc is xip flash, size 5 [F][MAIN] [MAIN:157]heap_size-------> 4277988 addr@0xa0236478 is xip flash, size 5 addr@0xa0236480 is xip flash, size 9 [queue_task]:ssid=***O password:12***** start connecting ... Exec key_mgmt WPA-PSK WPA-PSK-SHA256 SAE Exec pairwise TKIP CCMP GCMP GCMP-256 CCMP-256 Exec group TKIP CCMP GCMP GCMP-256 CCMP-256 Exec ieee80211w 0 Exec scan_ssid 1 Exec ssid "OPPO" Exec psk "12345678" WPA network 0: created and configuredStarting AP scan for specific SSID: OPPO, ssid_len:4 [F][MAIN] [MAIN:157]heap_size-------> 4260712 �[WPA] CTRL-EVENT-BSS-ADDED 0 BE:0D:A9:C9:C5:BA �[WPA] CTRL-EVENT-SCAN-RESULTS �[WPA] Trying to associate with BE:0D:A9:C9:C5:BA (SSID='****' freq=2472 MHz) --- OPT rxu_mgmt_ind is detected [FU]Set timer,state is 5,ongoing++ [FU]Tx cfm ongoing--, value is 0 [FL]RECV AUTH,sn:107 [FU]RECV AUTH,sn:107 [FU]Rx handler,state:5,fctl:0xb0 [FU]Clear timer in auth handler [FU]Set timer,state is 8,ongoing++ [FU]Tx cfm ongoing--, value is 0 [FL]RECV ASSOCRSP,sn:108 [FU]RECV ASSOCRSP,sn:108 [FU]Rx handler,state:8,fctl:0x10 [FU]Clear timer in assoc rsp handler �[WPA] Associated with BE:0D:A9:C9:C5:BA �[WPA] CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 [FU] rcv eapol 888e [FU] rcv eapol 888e �[WPA] WPA: Key negotiation completed with BE:0D:A9:C9:C5:BA [PTK=CCMP GTK=CCMP] �[WPA] CTRL-EVENT-CONNECTED - Connection to BE:Status [AT][RX] status_code 0 [AT][RX] reason_code 0 [AT]tus detail: sm connect ind ok T][RX] aid 3 BE:0D:A9:C9:C5:BA [AT][RX] band 2.4G [AT][RX] channel 13 ===Key Len VLan ID Default Key Hexdump(16Bytes MAX) [00] F-Bit 00 0 [04] FF:FF:FF:FF:FF:FF 64-Bit 00 5:BA 64-Bit 01 0 [09] FF:FF:FF:FF:FF:FF 64-Bit 0AC Address ========================= MAC B4:0E:CF:39:CC:CD wpa_supplicant_ctrl_iface_msg_cb: cmd send succeded, txt is CTRL-EVENT-CONNECTED - Connection to BE:0D:A9:C9:C5:BA completed [id=0 id_str=] IP:192.168.223.99 MASK: 255.255.255.0 Gateway: 192.168.223.212 [F][MAIN] [MAIN:157]heap_size-------> 4262016 [0] wl1: MAC=b4:0e:cf:39:cc:cd ip=192.168.223.99/24 UP,CONNECTED wifi connened ****,IP:192.168.223.99 addr@0xa00ffa84 is xip flash, size 4 addr@0xa0236414 is xip flash, size 4 [queue_task] ipv4 addr=192.168.223.99 [I][HTTP] Host:v0.yiketianqi.com, Server ip Address : 43.142.61.38:80[I][HTTP] allocated socketAssertion "sys_timeout: tline 311 in /root/AiPi-Open-Kits/aithinker_Ai-M6X_SDK/components[I][HTTP] HTTP client connect server success![I][HTTP] request send OK[F][HTTP] Handler byte=132 GET /free/week?unescape=1&appid=****&appsecret=**** HTTP/1.0 Host: v0.yiketianqi.com:80 User-Agent: AiPi-DSL_Dashboard[F][HTTP] HTTP/1.1 200 OK Server: Tengine Date: Tue, 25 Jun 2024 06:17:55 GMT Content-Type: application/json Connec�","update_time":"2024-06-25 14:03:43","data":[{"date":"2024-06-:"25","win":"南风","win_speed":"<3级"},{"date":"2024-06-27","":"晴","wea_img":"qing","tem_day":"36","tem_night":"26","win":"m_night":"24","win":"东南风","win_speed":"3-4级转<3级"},{","wea_img":"yin","tem_day":"33","tem_night":"25","win":"西南风","win_speed":"<3级"},{"date":m_night":"25","win":"无持续风向","win_speed":"<3级"}]}TP/1.1 200 OK Server: Tengine Date: Tue, 25 Jun 2024 06:17:55 GMT Content-Type: application/json Connection: close Acc4-06-25 14:03:43","data":[{"date":"2024-06-25","wea":"晴","wea_":"36","tem_night":"25","win":"南风","win_speed":"<3级"},{"da":"2024-06-28","wea":"晴","wea_img":"qing","tem_day":"36","tem_night":"26","win":"东南风","win_speed":"3-4级转<3级"},{"date":"2024-06-29","wea":"多云","wea_img":"yun","tem_day":"31","tem_night":"24","win":"东南风ay":"33","tem_night":"25","win":"西南风","win_speed":"<3级"},{"date":"2024-07-01","wea":"小雨","wea_img":"yu","tem_day":"338000005 mepc:a00e66ba mtval:00000000 Load access fault ``` 最后一行  [*load access fault*]([http://fanyi.baidu.com/?aldtype=23&tpltype=first#en/zh/load%20access%20fault](http://fanyi.baidu.com/?aldtype=23&tpltype=first#en/zh/load%20access%20fault))>>负载访问故障 如何解决？

wxlinus 发表于 2024-6-27 13:41
烧录的是不是那个天气站的，那个代码有bug，内存溢出了，还有空指针，很多问题 ...

这个代码改成我这个，就能解决卡屏问题

1. /**
   
2. * @brief HTTP解析请求数据
   
3. *
   
4. * @param https_request_data
   
5. * @return char*
   
6. */
   
7. static char* https_get_data(const char* https_request_data)
   
8. {
   
9.     char* request_data = https_request_data;
   
10.     static char* https_data;
    
11.     https_data = pvPortMalloc(1024*4);
    
12.     memset(https_data, 0, 1024*2);
    
13.     char* date = pvPortMalloc(64);
    
14.     char* request_value = strtok(request_data, "\n");
    
15.     for (size_t i = 0; i < 8; i++)
    
16.     {
    
17.         printf("%s\r\n", request_value);
    
18.         if (i==2) strcpy(date, request_value);
    
19.         request_value = strtok(NULL, "\n");
    
20.     }
    
21.     get_https_date(date);
    
22.     if (request_value != NULL) {
    
23.         strcpy(https_data, request_value);
    
24.     }
    
25.     vPortFree(date);
    
26.     return https_data;
    
27. }

复制代码

一直显示周五的问题

1. typedef struct {
   
2.     char city[16];
   
3.     char date[12];
   
4.     char week[10];
   
5.     char wea[24];
   
6.     char wea_img[8];
   
7.     char tem[4];
   
8.     char tem_day[4];
   
9.     char tem_night[4];
   
10.     char win[24];
    
11.     char win_speed[24];
    
12.     char win_meter[12];
    
13.     char air[4];
    
14.     char pressure[8];
    
15.     char humidity[8];
    
16. } dayweather_t;

复制代码

这个代码质量有点差，但是页面和外壳还不错

你这个烧录的哪个板子？

爱笑 发表于 2024-6-25 16:06
你这个烧录的哪个板子？

s1还有scp2.4都这样

云梦 发表于 2024-6-25 16:47
s1还有scp2.4都这样

给你找技术解决！

爱笑 发表于 2024-6-25 16:51
给你找技术解决！

嗯

。。。。。

云梦 发表于 2024-6-25 18:24
。。。。。

这个需要修复的，我们这边正在整理新的SDK，后续会同步更新。

爱笑 发表于 2024-6-26 08:38
这个需要修复的，我们这边正在整理新的SDK，后续会同步更新。

催一催

估计得等一段时间呢