我在Application中使能了blinky sample, 程序并没有运行

我按以上勾选了blink sample, 重新编译以后下载，闪灯程序并没有运行，请问，这个需要怎么操作？

longxiguang 发表于 2026-5-9 16:29
Kboot.
Flashboot Uart Init Succ!
Power On

为什么烧录AT指令的固件以后，发AT指令是这个结果

Kboot.
Flashboot Uart Init Succ!
Power On
Reboot cause:0xF0F0
Reboot count:0x0
Reboot count:0x0
Flash Init Succ!
manufacture_id = 0xFFFFFF
Jump to app! addr = 0x90115300

################################################

arch:Not define,Not define
company:Ai-Thinker|B&T
sle_mac:000000000000
sdk_version:release/1.0.t9
firmware_version:debug/v0.0.8_sle
compile_time:Apr 23 2024 15:53:02

ready

################################################
cmd length>19,not support
+ERROR(5)
cmd length>19,not support
+ERROR(5)
Unknown cmd:郃T+GMR
cmd length>19,not support
+ERROR(5)
cmd length>19,not support
+ERROR(5)
cmd length>19,not support
+ERROR(5)
Unknown cmd:类AT+GMR
Unknown cmd:览AT+GMR
Unknown cmd:痧AT+GMR
Unknown cmd:囵繟T+GMR
Unknown cmd:饊AT+GMR
Unknown cmd:[MEM]
AT+GMR

at version:debug/V4.18_Pv2.50.2
sdk version:1.0.t9
firmware version:debug/v0.0.8_sle
OK
cmd length>19,not support
+ERROR(5)
Unknown cmd:瘙囵俐AT+CSYSID
cmd length>19,not support
+ERROR(5)
Unknown cmd:AT+CSYSID
Unknown cmd:俐AT+CSYSID
Unknown cmd:郃T+CSYSID
Unknown cmd:AT+CSYSID
Unknown cmd:[餉T+CSYSID
cmd length>19,not support
+ERROR(5)
Unknown cmd:AT+CSYSID

Ai-Thinker小泽 发表于 2026-5-9 09:15
用这个看看吧https://gitee.com/HiSpark/fbb_bs2x/tree/master

这个SDK不对，没有文档里说的那个sample

用这个看看吧https://gitee.com/HiSpark/fbb_bs2x/tree/master

爱笑 发表于 2026-5-7 08:53
什么模组呢

Ai-BS21-32S

我买的小熊派也是这个sdk

什么模组呢