【板子申请】Ai-M61-32S开发环境搭建及示例代码编译

先在官网下载并安装vscode



接着按照教程依次克隆库文件，要注意的是文件的路径中不能包括空格，否则后续make时会提醒找不到指定文件

1. git clone https://gitee.com/Ai-Thinker-Open/AiPi-Open-Kits.git
   
2. cd AiPi-Open-Kits/
   
3. git submodule init
   
4. git submodule update
   
5. cd aithinker_Ai-M6X_SDK/
   
6. git submodule init
   
7. git submodule update
   
8. git clone https://gitee.com/bouffalolab/toolchain_gcc_t-head_windows.git
   

复制代码

其中需要访问GitHub，如果你的电脑不能访问可以换源到gitee或者开加速器


然后按照教程要求添加环境变量（好像添加顺序并不影响）


下一步检查环境变量是否生效（可以先重启电脑）

1. make -v
   
2. riscv64-unknown-elf-gcc -v

复制代码

输出如下则正常



下一步打开vscode，定位到AiPi-Eyes_weather文件夹，右键在内置命令行打开，输入make,也可以加V=sc来输出详细信息，加-j16来加速编译

1. make V=sc -j16

复制代码

编译成功时结果如下


如果编译错误，记得修改|AiPi-Open-Kits\aithinker_Ai-M6X_SDK里的project.build文件如下

1. # avoid 'Entering|Leaving directory' messages
   
2. ifndef VERBOSE
   
3. MAKEFLAGS += --no-print-directory
   
4. endif
   
5. 
   
6. command_flash = $(BL_FLASH_PROGRAM) --interface=uart --baudrate=$(BAUDRATE) \
   
7.         --port=$(COMX) --chipname=$(CHIP) --cpu_id=$(CPU_ID) --config=flash_prog_cfg.ini
   
8. command_efuse = $(BL_FLASH_PROGRAM) --interface=uart --baudrate=$(BAUDRATE) \
   
9.         --port=$(COMX) --chipname=$(CHIP) --efuse=build/build_out/efusedata.bin
   
10. command_puncover = $(PUNCOVER_PROGRAM) \
    
11.         --elf_file ./build/build_out/*.elf --map_file ./build/build_out/*.map \
    
12.         --build_dir ./build --src_root ${BL_SDK_BASE} --port 5001
    
13. 
    
14. ifeq ($(OS),Windows_NT)
    
15. CMAKE = $(BL_SDK_BASE)/tools/cmake/bin/cmake.exe
    
16. BL_FLASH_PROGRAM = ${BL_SDK_BASE}/tools/bflb_tools/bouffalo_flash_cube/BLFlashCommand.exe
    
17. PUNCOVER_PROGRAM = puncover_riscv.exe
    
18. cmake_generator = "MinGW Makefiles"
    
19. 
    
20. else
    
21.         ifeq ($(shell uname),Darwin)
    
22.         CMAKE = cmake # use user cmake
    
23.         BL_FLASH_PROGRAM = ${BL_SDK_BASE}/tools/bflb_tools/bouffalo_flash_cube/BLFlashCommand-macos
    
24.         PUNCOVER_PROGRAM = puncover_riscv
    
25.         cmake_generator = "Unix Makefiles"
    
26.         else ifeq ($(shell uname),FreeBSD)
    
27.         CMAKE = cmake # use user cmake
    
28.         BL_FLASH_PROGRAM = ${BL_SDK_BASE}/tools/bflb_tools/bouffalo_flash_cube/BLFlashCommand-freebsd
    
29.         PUNCOVER_PROGRAM = puncover_riscv
    
30.         cmake_generator = "Unix Makefiles"
    
31.         else ifeq ($(patsubst %WSL2,WSL2,$(shell uname -r)), WSL2)
    
32.         PS_PROGRAM = /mnt/c/Windows/System32/WindowsPowerShell/v1.0/powershell.exe
    
33.         CMAKE = $(BL_SDK_BASE)/tools/cmake/bin/cmake
    
34.         command_flash = $(PS_PROGRAM) make flash CHIP=$(CHIP) CPU_ID=$(CPU_ID) COMX=$(COMX) BAUDRATE=$(BAUDRATE)
    
35.         command_efuse = $(PS_PROGRAM) make efuse CHIP=$(CHIP) CPU_ID=$(CPU_ID) COMX=$(COMX) BAUDRATE=$(BAUDRATE)
    
36.         PUNCOVER_PROGRAM = puncover_riscv
    
37.         cmake_generator = "Unix Makefiles"
    
38.         else
    
39.         CMAKE = $(BL_SDK_BASE)/tools/cmake/bin/cmake
    
40.         BL_FLASH_PROGRAM = ${BL_SDK_BASE}/tools/bflb_tools/bouffalo_flash_cube/BLFlashCommand-ubuntu
    
41.         PUNCOVER_PROGRAM = puncover_riscv
    
42.         cmake_generator = "Unix Makefiles"
    
43.         endif
    
44. endif
    
45. 
    
46. # The command to remove a file.
    
47. RM = $(CMAKE) -E remove_directory
    
48. 
    
49. CPU_ID ?=
    
50. CONFIG_USB_HS ?=y
    
51. CONFIG_ROMAPI ?=y
    
52. CONFIG_DEBUG ?=y
    
53. CONFIG_TLSF ?=y
    
54. COMX ?=/dev/ttyUSB0
    
55. BAUDRATE ?=2000000
    
56. BOARD_DIR ?=
    
57. 
    
58. #cmake definition config
    
59. cmake_definition+= -DCROSS_COMPILE=${CROSS_COMPILE}
    
60. cmake_definition+= -DCHIP=$(CHIP)
    
61. cmake_definition+= -DCPU_ID=$(CPU_ID)
    
62. cmake_definition+= -DBOARD=$(BOARD)
    
63. cmake_definition+= -DBOARD_DIR=$(BOARD_DIR)
    
64. cmake_definition+= -DCONFIG_DEBUG=$(CONFIG_DEBUG)
    
65. cmake_definition+= -DCONFIG_ROMAPI=$(CONFIG_ROMAPI)
    
66. cmake_definition+= -DCONFIG_USB_HS=$(CONFIG_USB_HS)
    
67. cmake_definition+= -DCONFIG_COMX=$(COMX)
    
68. cmake_definition+= -DCMAKE_EXPORT_COMPILE_COMMANDS=OFF
    
69. cmake_definition+= -DCONFIG_TLSF=$(CONFIG_TLSF)
    
70. 
    
71. build:Makefile
    
72.         $(CMAKE) -S . -B build -G $(cmake_generator) $(cmake_definition)
    
73.         make -C build -j8
    
74.         make -C build combine
    
75. #        cp $(BL_SDK_BASE)/bsp/board/bl616dk/config/edata.bin build/build_out
    
76. #        cp $(BL_SDK_BASE)/bsp/board/bl616dk/config/Rx_boot2_m61.bin build/build_out
    
77. 
    
78. ninja:Makefile
    
79.         $(CMAKE) -S . -B build -G Ninja $(cmake_definition)
    
80.         cd build && ninja && ninja combine
    
81. 
    
82. clean::
    
83.         $(RM) build
    
84. 
    
85. menuconfig::
    
86.         python $(BL_SDK_BASE)/tools/kconfig/menuconfig.py
    
87. 
    
88. flash:build
    
89.         $(command_flash)
    
90. #        cp $(BL_SDK_BASE)/tools/bflb_tools/bouffalo_flash_cube/chips/bl616/img_create/whole_flash_data.bin build/build_out/
    
91. efuse:
    
92.         $(command_efuse)
    
93. 
    
94. puncover:
    
95.         $(command_puncover)
    
96. 
    
97. .PHONY:build clean menuconfig ninja
    

复制代码

第一次写帖子，如有不妥请谅解，谢谢

通过